Skip to content

Home / Our work

Our chimney work in New Jersey

Photos and stories from actual AM Chimney Sweep projects.

Brick chimney with a white crown and metal cap on a shingled roof, Montclair, NJ
Montclair, NJ

Crown repair and new chimney cap

Hairline cracks in the crown were resurfaced and weatherproofed ahead of winter, and a new cap was installed.

View project
AfterAfter: smooth coated smoke chamber with a stepped smoke shelf, Morristown, NJ
Morristown, NJ

Smoke chamber repair

Gaps in the smoke chamber masonry were contributing to smoke backing up into the home. The chamber was renewed and coated with high-heat cement.

View project
Chimney top with a metal cap on a coated crown, Jersey City, NJ
Jersey City, NJ

New liner and crown repair

A Level 2 inspection led to a new chimney liner and a repaired crown.

View project
New metal chase cover with a flue pipe on a vinyl-sided chimney chase
Monroe Township, NJ

Chimney Chase Cover Installation in Monroe Township, NJ

Case study: a new chimney chase cover installed in Monroe Township, NJ, after the homeowner reported a problem with the chase and cap. AM Chimney Sweep.

View project
AfterChimney with a freshly applied white stucco coating and a stainless steel flue pipe, seen from the roof
Tinton Falls, NJ

Chimney Crown, Flashing and Stucco Repairs in Tinton Falls, NJ

Case study: chimney crown, flashing and stucco repairs in Tinton Falls, NJ, following a Level 1 inspection. Photos of the original and finished chimney.

View project
AfterLooking up into a smooth, newly coated smoke chamber
Hillsborough Township, NJ

Chimney Crown and Interior Repairs Case Study — Hillsborough Township, NJ

Case study: crown repair, HeatShield flue work and smoke chamber coating in Hillsborough Township, NJ. Interior and exterior photos from AM Chimney Sweep.

View project
Brick chimney with weathered mortar joints and darkened brick
Rumson, NJ

Chimney Crown and Masonry Repairs Case Study — Rumson, NJ

Case study: crown repairs, a crown replacement, roofline repointing and cleaning on two chimneys in Rumson, NJ. Close-up photos from AM Chimney Sweep.

View project
AfterBrick chimney with a metal cap fitted on each of its two flues
East Brunswick, NJ

Chimney Crown Repair and Cap Installation in East Brunswick, NJ

Case study: a Level 2 inspection before HVAC work led to a chimney crown repair and new cap in East Brunswick, NJ. See the project from AM Chimney Sweep.

View project
New black flashing material at the base of a vinyl-sided chimney chase where it meets the shingles
Berkeley Heights, NJ

Chimney Leak Repair in Berkeley Heights, NJ

Case study: a chimney leak in Berkeley Heights, NJ, fixed with flashing repair, a new chimney cap and a chase cover. See the project from AM Chimney Sweep.

View project
AfterBrick house with a slim metal flue pipe at the top of the chimney
Trenton, NJ

Chimney Repair and Rebuild Case Study — Trenton, NJ

Case study: a liner request in Trenton, NJ revealed unsafe chimney construction. The upper section was removed and a new chimney-top assembly installed.

View project
Looking up a smooth, lined flue from the fireplace end
Plainsboro Township, NJ

HeatShield Flue Restoration, Crown Repair and Chimney Caps in Plainsboro Township, NJ

Case study: after a Level 2 inspection in Plainsboro Township, NJ, HeatShield flue restoration, crown repair and two new caps restored the fireplace.

View project
>
Call NowBook Now